简历是出国读书的学生，需要大家进行认真的准备，可以参考模板和范文，这样大家可以规避不少误区。下面和出国留学网来看看留学申请简历英文模板 怎样准备出国留学文书？
美国留学
Objective
To pursue graduate study in chemistry and chemical engineering
Education
School of Chemical Engineering and Technology
xxxx University， China Degree： B.S.
GPA： 3.15/4.0 （Overall）； 3.21/4.0 （Major） Class Rank： 5/52
Experience
xxxx University
RA： School of Chemical Engineering and Technology 2005 - present
Supervisor： Professor xxx
Project： Synthesis and photo-luminescence of porphyrins.
Responsibility：
1 Database and literature search for relative theory and products synthesis
2 Design the experimental scheme including optimum combination of catalyst and reagent， flow sequence， react condition and facility.
3 Laboratory experiment to interspace production combination and disposal， combination of wanted production etc.； experimental process record.
4 Preliminary data analysis and products verification.
5 A Chinese paper based my results is in preparation.
xxx Chemistry， xx（China） summer 2006 internship
Polyvinyl Chloride （PVC） synthesis process optimization
xx Electronic Material Company， xxx （China） summer 2005 internship
Polymer product performance analysis
TA： America-China Exchange Society， xx（China） 2004 part-time job
Tutor high school students English with a foreign teacher
English proficiency
GRE V：470 （51%below） Q750 （80%below） AW：3.5 （16%below） 10/22/05
TOFEL Section1：57 Secton2：66 Section3：60 Total：610 TWE： 4.0 11/19/05
Honor Award and Associations
Triple A Model Student Award every semester 2004-2006
Public Relation Division Chairperson， Students’ Union， xxx University 2004-2005
China Spoken English Test B Plus 2004
Member of Chinese Young Volunteers Association 2004
2nd Place Award of xx University Female Pingpong Tournament 2003
Interest
Good at singing， Painting， calligraphy and Pingpong.
加拿大留学
Curriculum Vitae
Name： Gender： Male
Date of Birth： Place of Birth： China
Marital status： SingleLanguage： English， proficient
Telephone： Email：
Education Experience
September 1989 - July 1993
Department of Electrical Engineering， Shenyang Institute of Aeronautics
* Majored in Radio Engineering
* Won a third-class Award in the Contest of Technological Facture & Experimental Skills in Electronics and Electrician， for Students from the Colleges affiliated to the Ministry of Aeronautics & Astronautics
*Masterful in analog circuit， power circuit， switching power circuit， operation and amplification； proficient in solving problems related to analog circuit.
* Bachelor of Engineering Degree obtained in July 1993
September 1993 - July 1996
Nanjing University of Aeronautics & Astronautics
* Majored in Communication & Electrical System
* Main field of research was contemporary communication circuit， especially on high efficiency， high frequency power amplifier （Class E and Class S）.
*Instructed undergraduate students in their research on wide band frequency multiplier
* My diploma thesis was The Electromagnetic Compatibility Testing System of an Airplane
* Read extensively on electromagnetic compatibility and its testing， obtained a through knowledge on the test of electromagnetic compatibility， and on the solutions （methods and instrument） to the issues of electromagnetic compatibility. Familiar with the testing standards， especially the GJB and the MTL-STD
* Master of Engineering Degree obtained in July 1996
Work Experience
January 1994 - December 1995
* Chairted the research and development work in the Nanjing Leader Electronics Company
* Independently developed 3 types of charging devices and management systems for telephones， LDJF-I， LDJF-II and LDJF-1， and their volume of sales exceeded a total of 5，000.
* Became the Copartner and Chief Engineer of the company at the end of 1995
January 1996 - August 1999
Chief Engineer， Nanjing Leader Electronics Company
* Hosted the refinement of HTD-80 Program Controlled Telephone Exchanger by adding an E & M trunk.
*Primary designer of the HTD-120 Program Controlled Telephone Exchanger
* Perfection of the SSC-2 Telecontrol System， which obtained the commercial approval from the Ministry of Electrical Power Resource
*Took charge of the quality control and production of the company
*Perfection of the FFT Algorithm Program for alternative current sampling in the SSC-2 System， which was used to measure harmonic wave
* In the research and development processes， read extensively on production reliability and solved many problems related to production reliability and electromagnet compatibility
* Designed the management board by using an Intel 80C188EB processor， studied the TC 2.0 Compiler and rewrote its startup code， and developed a locator and a simple debugging tool
* Lead the development of the Supervision System for Petroleum Tanks， based on the SSC-2 System， for the Yangtze Petroleum Chemical Works
* Chaired the development of the Data Collection Device for Electrical Power Charging System， which was not finished before my departure from the company
* Retrieved a lot of literatures on field bus and real time operating systems， including CAN， Hart， Lonworks， ProfiBus， FF， Arcnet， Ethernet
推荐阅读：
